Polished Concrete Floors Contractors

Description

Main feature
The paint film has a soft luster and bright colors.

Quick drying, long pot life

Good adhesion, wear-resistant and durable

Detailed introduction
Solvent-based epoxy topcoat is a solvent-based two-component epoxy resin functional coating. This product has strong adhesion, durability, acid and alkali resistance, corrosion resistance, wear resistance, etc., and is waterproof, mildew-proof, and leak-proof. The construction is convenient, the material consumption is small, and the cost is low. It is suitable for ground protection in sports venues, industrial workshops, indoor parking lots, storage warehouses and other places with clean, wear-resistant, corrosion-resistant and water-resistant requirements.

Application range
For topcoat application in industrial plants, warehouses, underground parking lots, offices, etc., this product can also be used to prepare topcoat putty and be used to seal the ground before surface coating.

Product information
The material is divided into two components: A and B.

Component A solid color viscous liquid 15kg/barrel

Component B yellow transparent liquid 6kg/barrel

Packaging: Printed metal packaging drum. It is recommended to stack it in three layers when stacking.

Storage: The storage temperature is 5-35℃. It should be stored in a cool, ventilated and dry warehouse, away from fire.

seeds, heat sources, and strictly prohibited from exposure to sunlight.

Technical data
Status: Even after stirring, no lumps, no impurities

Adhesion: Level 1

Flexibility: Level 1

Hardness: >H

Wear resistance: <0.04

Drying time: Surface dry: less than 1 hour

Hard work: less than 24 hours

(Temperature is 25℃, relative humidity is 50%)

Grassroots requirements
The compressive strength of the concrete floor should be ≥20Mpa, the tensile strength should be ≥1.5Mpa, and the flatness should be ±4mm/2m. The base surface must be dry, clean, and free from oil and other pollution.

Construction tips
The construction environment must be clean, clean and dust-free to avoid affecting the coating effect.

The paint should be stirred evenly after opening the can to avoid color difference. ,

Construction should be stopped when the temperature falls below 5°C

It is not suitable for construction in humid weather. The ideal humidity for construction is 35%-80% (relative humidity)

Construction Conditions
Ground base temperature: 5-35°C

Construction environment temperature: 5-35℃

Moisture content of ground base: <8%

Relative humidity of construction environment: <80%

Construction methods/tools
Dilution: 0-10%, depending on the actual conditions at the construction site

Construction method: brushing, rolling or spraying.

Tool: roller brush

Instructions for use
Surface treatment: Before construction, dust, gravel, grease, and old coatings should be removed from the base surface, and cracks and holes should be smoothed with putty, primer should be used to seal the base surface, and epoxy intermediate paint should be scraped and leveled.

Theoretical dosage: about 3-4 square meters/kg (two-pass construction).

Ratio and opening time: The ratio of main agent to curing agent is 5:2 (weight ratio). It must be mixed and stirred strictly according to the ratio before use. Materials A and B should be used within 120 minutes after mixing. If the viscosity of the material is found to increase significantly, it cannot be used any longer and should be discarded.

Precautions
For the safe use of the product, please ask the manufacturer for the product safety data sheet (MSDS)

Construction personnel should strengthen safety protection when using this product, and the construction environment should be kept ventilated.

This product is a flammable item, and it should be kept away from fire sources and flammable and explosive items during transportation, storage, and construction.

For more details, please contact the local distributors or consult the factory directly.

First-aid
Skin Contact: Wash with plenty of water and remove contaminated clothing and shoes.

Eye contact: Rinse with running water or saline and seek medical attention if necessary.

Inhalation: Move to a place with fresh air, keep the respiratory tract unobstructed, and seek medical attention if you feel unwell.

Ingestion: clean mouth, induce vomiting, seek medical attention

Fire-fighting measures
Hazardous characteristics: Can burn when exposed to open flames. Hazardous combustion products: CO, CO2, etc.

Fire extinguishing methods and fire extinguishing agents: dry powder, carbon dioxide, sand. Evacuate nearby and surrounding personnel, firefighters should wear pressure oxygen breathing apparatus, spray water on containers exposed to fire to cool them down and disperse evaporation.