Description
Main feature
This product has been certified by the China Environmental Labeling Certification Committee
Economical and environmentally friendly interior wall finishing paint with high cost performance * Strong covering power and scrub resistance
Excellent adhesion, long-term protection of the wall
Soft gloss, easy to apply
Scope of application
It can be widely used in the decoration and protection of various interior walls.
Technical Parameters
Implementation standards: GB/T9756-2018, GB18582-2020
Theoretical paint consumption: 3~4 square meters/kg/two coats (calculated based on dry film thickness of 30 microns)
Drying time: 1 hour to surface dry (at an ambient temperature of 23°C and a relative humidity of 50%)
Dry for 2 hours (at an ambient temperature of 23°C and a relative humidity of 50%)
Recoating time: 4 hours (at an ambient temperature of 23°C and a relative humidity of 50%
Contrast ratio: ≥0.91
Scrub resistance: ≥1000 times
Shelf life: 24 months from the date of production (unopened)
Use reference
Please read the instructions for use before construction
*Substrate: should be solid, clean, dry (moisture content ≤10%), PH<10; for powdered substrates, use tools such as a spatula or wire brush to remove the powdered layer and completely remove mold spots.
*Old paint film: check the aging of the old paint film, and the loose parts should be completely removed
*Salting out: It is recommended to treat with oxalic acid solution of appropriate concentration (the specific concentration should be determined according to the degree of salting out, but the concentration generally does not exceed 5%), then rinse with clean high-pressure water and dry
*Construction method: either roller coating or spraying
*Dilution: Generally, there is no need to add water to dilute it. If the material is thick, you can add no more than 5% water to dilute it.
*Cleaning of utensils: wash them with clean water in time after construction
*Safety, labor protection: safety measures should be taken during construction, and labor protection clothing should be worn
*Supporting system: NQ-401 “Meidi” alkali resistant primer
Environmental requirements
*Stored in a dry and ventilated warehouse at 5~35℃
*Construction environment: temperature ≥5℃ (base temperature ≥10℃), humidity ≤85%
*Transportation: handled as non-dangerous goods, anti-freezing and exposure
Reviews
There are no reviews yet.